SMT Placement Machine parts description

1. Host
1) Main Power Switch: Turn the main power on or off
2) Vision Monitor: Display the image or component and symbol recognition obtained by moving the lens.
3) Operation Monitor: Display the VIOS software screen of the machine operation. If there is an error or a problem during the operation, the correction information is also displayed on this screen.
4) Warning Lamp: Indicates the operating conditions of the placement machine in green, yellow and red.
Green: The machine is in automatic operation
Yellow: Error (return to origin cannot be performed, pick up error, identify fault, etc.) or interlock generation.
Red: The machine is in an emergency stop state (the machine or YPU stop button is pressed).
5) Emergency Stop Button: Press this button to trigger an emergency stop immediately.


2. Working Head
1) Work head assembly: Move in the XY direction (or X direction), pick up parts from the feeder and mount them on the PCB.
2) Movement Handle: When the servo control is released, you can use your hand to move in each direction. This handle is usually used when moving the work head assembly by hand.


3. (Vision System)
1) Moving Camera: used to identify the mark or position or coordinate tracking on the PCB.
2) Single-Vision Camera: used to identify components, mainly those with pinned QPF.
3) Backlight Unit: When identifiable with a separate vision lens, the component is illuminated from the back.
4) Laser Unit: Laser beam can be used to identify parts, mainly sheet parts.
5) Multi-Vision Camera: It can recognize multiple parts at a time and speed up recognition.

4. Feeder Plate
With feeder, bulk feeder and tube feeder (multi-tube feeder), it can be installed on the front or rear feeding platform of the placement machine.

5. Axis Configuration
X-axis: The moving head assembly is parallel to the PCB transfer direction.
Y-axis: The moving head assembly is perpendicular to the PCB transfer direction.
Z axis: controls the height of the working head assembly.
R axis: control the rotation of the nozzle shaft of the working head assembly.
W axis: adjust the width of the transport rail.

6. Conveyor Unit
(1)主挡板(Main Stopper)
(2) 定位针 (Locate Pins)
(3)入推部件(Push-in Unit)
(4)边缘夹具 (Edge Clamp)
(5)上推平板 (Push-up Plate)
(6)上推顶针 (Push-up Pins)
(7)入口挡板 (Entrance Stopper)

7. Nozzle Station:

 Allows automatic exchange of nozzles for a total of 16 nozzles, 7 standard and 9 optional nozzles.

8. Air Supply Unit includes air filter, air pressure adjustment button, barometer.


9. Input and Operation Parts (Data Input and Operation Devices)
(1) YPU ( Programming Unit) programming component
Ready button: The abnormal stop is released and the servo system works.

(2) Keyboard (Keyboard) function of each key
F1: Help information for getting current options
F2: used in PCB production transformation
F3: Conversion preparation target (component information, placement information, etc.)
F4: Convert secondary window (shape, identification, etc.)
F5: used to jump to the data address
F6: Use when assisting adjustment
F7: Setting the database
F8: visual display of physical outline
F9: Photo location
F10: coordinate tracking
Tab: conversion between windows
Insert , Delete : change the parameters of the secondary window
↑↓→←: cursor movement and page UP/Down movement
Space Bar: Pause the machine during operation (press again to release the pause)