It's price range form USD8000 to USD 25000,which depend on vintage and working status.

MPM Momentum BTB Screen printer
Substrate processing:
Maximum substrate size (XxY): 609.6mm x 508mm (24" x 20")
Minimum substrate size (XxY): 50.8mmx50.8mm (2"x2")
Substrate thickness: 0.2mm (0.008") to 5.0mm (0.20"),
Maximum substrate weight: 4.5kg (9.92lbs)
Substrate edge gap: 3.0mm (0.118")
Bottom clearance: 12.7mm (0.5") standard, configurable 25.4mm (1.0")
Substrate clamping: fixed top clamping, table vacuum, EdgeLoc (optional)
Substrate support method: table vacuum, magnetic thimble, vacuum thimble, support block, optional special fixture (less tools) or optional Grid-Lok



Printing parameters:
Maximum printing area (XxY): 609.6mmx508mm (24"x20")
Snap-off: 0mm to 6.35mm (0" to 0.25")
Printing speed: 0.635mm / sec - 304.8mm / sec (0.025in / sec - 12in / sec)
Printing pressure: 0 to 22.7kg (0lb to 50lbs)
Template frame size: 737mmx737mm (29"x29") smaller size template optional
Reference point type: standard shape reference point (see SMEMA standard), pad/opening
Camera System: Single Digital Camera - MPM's patented up/down vision system
Alignment accuracy and repeatability of the entire system: ±12.5 μm (±0.0005”)@6σ, Cpk≥2.0*
Technical indicators are represented by process changes in the production environment. This performance data includes printing speed, table rise and camera movement.
Actual solder paste printing: ±20 micron repeatability (±0.0008") @6σ, Cpk≥2.0*
Actual solder paste print position repeatability based on third-party test system verification
Cycle time: Momentum BTB 9 seconds standard, Momentum HiE BTB 7.5 second standard
Power requirements: 200 to 240VAC (±10%) single phase @50/60Hz, 15A
Compressed air requirements: 100psi @4cfm (standard operating mode) to 18cfm (vacuum wipe) (7bar@5L/s to 12L/s), 12.7mm (0.5") diameter tube ODx9.5mm (3/8") pipe diameter
Machine height (removing the lighthouse): 1589.4mm (62.57") at 940mm (37.0") transport height
Machine depth: 1394mm (54.88")
Machine width: Momentum BTB1195.4mm (47.06”)
Minimum gap in front: 508mm (20.0")
Minimum clearance behind: 508mm (20.0")
Machine weight: Momentum BTB797kg (1757lbs)
Box weight: Momentum BTB1090.5kg (2399lbs)
* The higher the Cpk value, the lower the variability of the process specification limits. In a qualified 6 sigma process (ie, allowing 6 standard deviations to be added or subtracted within the specification limits), Cpk is greater than or equal to 2.0. Speedline retains specifications. The power to make changes without prior notice. Please consult the factory for specific specifications.



MPM Momentum BTB screen printer Features
Optimize productivity with flexible configuration
Momentum BTB optimizes the utilization of the manufacturer's dual-channel line and the use of plant space. And a single machine can be easily redeployed as demand changes. Configurable shuttle delivery options.

Smaller space and less investment for more production
The Momentum BTB features a smaller footprint than the standard Momentum platform. The back-to-back configuration provides dual-channel printing that increases throughput without significantly increasing the total footprint of the device. For example, a dual-channel line rather than a traditional double The sidestream return line can greatly reduce capital requirements. The dual channel printing method can produce higher output per square meter than the single channel configuration, and can flexibly print multiple products in a single SMT production line, for example, top Surface and bottom, same side or mother/female substrate.

With MPMMomentum BTB, you'll still be able to get the proven repeatability and performance of all proven Momentum platforms. The features and options of most Momentum series are also available on Momentum BTB. Including our powerful Benchmark software, EnclosedFlow printing system, MPM 'Pine-pitch printing solutions', template wiping and cleaning options such as solvent-based RapidClean, powerful vision and print verification system options, and the MPMMomentum BTB press offers two different balances


If you need any MPM Screen printer parts,pls contact us anytime: tony@joysmt.com