#
JOYSMT

JOY TECHNOLOGY CO.,LIMITED

SMT Equipment | Electronic Component Provider

#

judy@joysmt.com

#

+86-13823724660

All Product Catagories >>
   Keywords： Smt machine   Smt parts  Peripheral Equipment  Consumable material  
All Product Catagories >>
PCB pick and place Machine

Panasonic Placement Machine

Juki Placement Machine

Fuji Placement Machine

Hitachi Placement Machine

 #
SMT Peripheral Equipment

SMT Screen Printer & Parts

SMT Feeder Storage Cart

PCB Magazine Rack

SMT Feeder Calibration Jig

 #
SMT Spare Parts

Panasonic SMT Parts

JUKI SMT Parts

FUJI SMT Parts

Hitachi SMT Parts

 #
SMT Consumable Material

SMT Splice Products

Anti - Static Products

SMT Solder Paste & Wire

SMT Grease & Lubricants

 #
Electronic Component

IC Chips

Embedded Microcontrollers

Interface-CODECS

Resistor|Capacitor|Transistor

 #
Hot sale product
Contact us
  • #
  • #+86 13823724660
  • #+86 0755-36527060
  • #judy@joysmt.com
  • #evan@joysmt.com
  • #Skype:+86 13823724660
  • #WhatsApp:+86 13823724660
Get a quote today
 Get infomation of our newest
products and promotions
FAQ

Location : Home  > FAQ

How to configure Fuji NXT equipment production line?

Time: 2015-09-30 10:39:25          Source  by: www.gladsmt.com

How to configure Fuji NXT equipment production line?


How to configure Fuji NXT equipment production line?


Machine appearance
Supporting power / compressed air / UPS
Computer with machine installation control software
Machine configuration area

1.  Appearance of the machine
1)Fuji model: NXT(M3s x 6)+(M6s x 1)+(M6s with tray unit – L x 1) / Line (Dual PCB conveyor)
2)Fuji model: NXT(M3s x 6)+XP243E(Fixed/MTU) X 1/ Line (Single PCB conveyor)


2. supporting power / compressed air / UPS
(1) Power supply: three-phase 200 volts - 230 volts.
(2) Frequency: 50-60HZ.

(3) NXT each module power list:
A: Module: 0.8Kva/M3s .1.0kva/M6s.
B: Module base: 1.5kva/4M base. 1.4Kva/2M base.
C: Pallet feeder: 0.6Kva/ Tray unit-L

(4) Standard parameters of compressed gas:
A: Air source: 0.5Mpa (ANR).
B: Air consumption: 40L/Min / 4Mbase. 20L/Min / 4Mbase

(5).Supporting power supply for the machine / compressed air / UPS (Remarks:)
1) It is recommended that customers configure the following accessory devices for FUJI NXT devices:
A: power transformer.
Role: Convert domestic three-phase 380 volt industrial power to provide three-phase 200 volt-230 volt power supply requirements for NXT machines
B: compressed air pump.
role: provide clean and dry compressed air for NXT
C: UPS.
Action: Provide a stable current to prevent damage to the machine control board caused by excessive instantaneous current value. 
At the same time, provide backup power to ensure proper shutdown of the machine.


2.  Power list of different configurations of the machine
(1)Fuji model: NXT(M3s x 6)+(M6s x 1)+(M6s with tray unit – L x 1) / Line (Single or Dual PCB conveyor)
A: M3s module: 0.8Kva/M3s x 6sets = 4.8Kva.
B: M6s module: 1.0Kva/M6s x 2sets = 2.0Kva.
C:Module base: 1.6Kva/4M base+2M base=1.6Kva.
1.5Kva/4M base x 1set = 1.5Kva.
D:Tray unit: 0.6Kva/Tray unit-L x 1set =0.6Kva.
Total amount: 10.5Kva.
------------------------------------------------ ----------------
Remark: According to the power factor of equipment 0.8, it is recommended to configure the rated power.
A 15kva (3Phase/380v) digitally controlled voltage regulator.


3. Power list of different configurations of the machine
Fuji model: NXT(M3s x 6)+XP243E(Fixde/MTU) x 1 / Line (Single PCB conveyor)
A: M3s module: 0.8Kva/M3s x 6sets = 4.8Kva.
B: XP243E: 4.0Kva/xp243e x 1set = 4.0Kva.
Total amount: 8.80Kva.
------------------------------------------------ ----------------
Remark: According to the power factor of equipment 0.8, it is recommended to configure the rated power.
A 15kva (3Phase/380v) digitally controlled voltage regulator.


4. List of compressed air flow in different configurations of the machine
(1)Fuji model: NXT(M3s x 6)+(M6s x 1)+(M6s with tray unit – L x 1) / Line (Single or Dual PCB conveyor)
A: Gas source: 0.5Mpa (ANR).
B: Air consumption: 40l/min (4M Base).20l/min (2M Base). +500l/min (when using a suction device)
C: Calculation: 40l/min(4M Base)x 2sets=80l/min. 20l/min(2M Base )x 1set=20l/min.
add:mounting head/nozzle station.....=500l/min
------------------------------------------------- ---------------
Total amount: 600l/min


5.  List of compressed air flow in different configurations of the machine
(1)Fuji model:NXT(M3s x 6)+(XP243E x 1) / Line (Single PCB conveyor)
A: Gas source: 0.5Mpa (ANR).
B: Air consumption: 40l/min (4M Base).20l/min (2M Base).
 +500l/min (when using a suction device)
C: Calculation: 40l/min(4M Base)x 1set=40l/min.
20l/min(2M Base )x 1set=20l/min.
add:mounting head/nozzle station.....=500l/min
XP243E: 128l/min
Total amount: 688l/min.
------------------------------------------------- ---------------
 

6. Machine configuration UPS recommendations
(1)Fuji model: NXT(M3s x 6)+(M6s x 1)+(M6s with tray unit – L x 1) / Line (Single or Dual PCB conveyor)

(2)Fuji model: NXT(M3s x 6)+(M6s x 1)+(XP243Ex 1) / Line (Single PCB conveyor)


7. Suggestions:
1) configuration power 25Kva, delay 15 minutes.
2) Contact UPS supplier for specific UPS setting performance parameters.
3) Computer hardware configuration requirements for Fuji flexa software installation
(1) Microsoft Windows 2000 (SP2 or later) #1, and Microsoft Windows NT 4.0 (SP5 or later) #2
(2) Microsoft Internet Explorer 5.01 (SP2 or newer) #3
(3) Pentium 500Mhz computer or equivalent (1Ghz~2.4Ghz or higher) l (4) 128MB RAM (more than 512 MB recommended)
(5) floppy disk drive and hard disk drive
(6) VGA monitor with resolution of 800 × 600 (1024 × 768 or more recommended) l (7) 10/100Mbps Ethernet hub (Hubs)
(8) Install the correct TCP/IP network
(9) Windows corresponds to mouse or indicator
Object computer data access to management level


8.  Area occupied by the machine
(1)Fuji model: NXT(M3s x 6)+(M6s x 1)+(M6s with tray unit – L x 1) / Line (Single or Dual PCB conveyor)
Fuji NXT:
(a) L1390mm / 4Mbase x 2sets=L2780mm .
(b)L740mm / 2Mbase x 1set =L740mm.
 Machine length: 3520mm.
(c)W1934mm / 4M base&2Mbase=L1934mm.
 Machine length: 1934mm. Floor area: 6.80 square meters


9. Area occupied by the machine
(1)Fuji model:NXT(M3s x 6)+XP243 x 1) / Line (Single PCB conveyor)
A: Fuji NXT:
(a) L1390mm / 4Mbase x 1set=L1390mm .
(b)L740mm / 2Mbase x 1set =L740mm. Machine length: 2670mm.
(c)W1934mm / 4M base&2Mbase=L1934mm. Machine length: 1934mm.
 Floor area: 5.20 square meters

Prev  :  How to Select the Best Stencil for SMT and Advanced IC Package Printing？

Next  :   How to adjust FUJI NXT IPS the current value？

Relative Product Recommended

#

JOY TECHNOLOGY

PRODUCT CATAGORIES

Links: Yamaha Fuji Juki Panasonic Universal Minami