It's price range form USD7000 to USD24800,which depend on vintage and working status.

Substrate processing:
Maximum substrate size (XxY): 609.6mm x 508mm (24" x 20")
For boards larger than 20”, special fixtures are required.
Minimum substrate size (XxY): 50.8mmx50.8mm (2"x2")
Substrate thickness size: 0.2mm to 5.0mm (0.008" to 0.20")
Maximum substrate weight: 4.5kg (10lbs)
Substrate edge gap: 3.0mm (0.118")
Bottom clearance: 12.7mm (0.5") standard. Configurable 25.4mm (1.0")
Substrate clamping: fixed top clamping, table vacuum
Substrate support method: Magnetic thimble options: vacuum baffle, vacuum thimble, support block, special fixture, patented automatic device, Quik-Tool


Printing parameters:
Maximum printing area (XxY): 609.6mmx508mm (24"x20")
Snap-off: 0mm to 6.35mm (0" to 0.25")
Printing speed: 0.635mm / sec to 304.8mm / sec (0.025in / sec - 12in / sec)
Printing pressure: 0 to 22.7kg (0lb to 50lbs)
Template frame size: 737mmx737mm (29"x29") smaller size template optional
Image Field of View (FOV): 10.6mm x 8.0mm (0.417" x 0.315")
Reference point type: standard shape reference point (see SMEMA standard), pad/opening
Camera System: Single Digital Camera - MPM's patented up/down vision system
Alignment accuracy and repeatability of the entire system: ±12.5 μm (±0.0005”)@6σ, Cpk≥2.0*
Technical indicators are represented by process changes in the production environment. This performance data includes printing speed, table rise and camera movement.
Actual solder paste placement accuracy and repeatability: ±20 μm (±0.0008”)@6σ, Cpk≥2.0*
Actual solder paste print position repeatability based on third-party test system verification
Cycle time: 11 seconds standard
Power requirements: 200 to 240VAC (±10%) single phase @50/60Hz, 15A
Compressed air requirements: 100psi@4cfm (standard operating mode) to 18cfm (vacuum wipe) (6.89bar@1.9L/sec to 8.5L/sec), 12.7mm (0.5") diameter tube, ODx9.5mm (3/8" Pipeline inner diameter
Machine height (removing the lighthouse): 1589.4mm (62.57") at 940mm (37.0") transport height
Machine depth: 1394mm (54.88")
Machine width: 1195.4mm (47.06")
Minimum gap in front: 508mm (20.0")
Minimum clearance behind: 508mm (20.0")
Machine weight: 797kg (1757lbs)
Box weight: 1090.5kg (2399lbs)
The higher the Cpk value, the lower the variability of the process specification limits. In a qualified 6 sigma process (ie, allowing 6 standard deviations to be added or subtracted within the specification limits), Cpk ≥ 2.0. Speedline retains modifications to the specifications. The power without prior notice. Please consult the factory for specific specifications.


MPM Momentum BTB 125Screen Printer Features:
A reasonably priced device with ultra-high performance and flexibility

The MPMMomentum BTB 125 is reasonably priced and flexible. It can be configured as a stand-alone in-line press or as a two-channel back-to-back press with another Momentum BTB 125 for dual-channel production. The Momentum BTB 125 delivers outstanding performance due to initial low investment. Coupled with dual-channel capacity, the return on investment is faster than that of competitors' presses. Because it is 200mm shorter than the Momentum series of Elite and HiE presses, it can save floor space when used alone or in back-to-back. In back-to-back, production increases but the production line does not grow. At the same time, Momentum BTB 125 features the precision and repeatability of expensive, high-end equipment. MomentumBTB's precision is patented for precision design, system integration and scraper conveyor systems. As a result, the superior performance of the Momentum BTB 125 at a relatively low purchase cost was created.

Advanced inspection and SPC tools
The Momentum BTB 125 combines extended 2D inspection capabilities with MPM's unique contrast and texture-based patented BridgeVision? and StencilVision?. As part of a powerful SPC program tool, as part of a powerful SPC program tool, pad level details It can be observed on the screen that device level results are stored on each board. Detailed processing information, extended detection capabilities and the fastest quantitative, post-printing device level data collection are combined to make your process engineer effective. Optimize the system and use the most efficient equipment.


Easy to learn, easy to use
When it's easy to use to make the device perform better, users can enjoy low cost. The Momentum BTB 125 is designed with operator requirements in mind, so it is easy to learn and easier to use. Speedline's Benchmark software is based on the familiar Windows? operating system. Provides a convenient graphical user interface. Built-in smart device provides guidance on all machine functions, applications and bug fixes.

If you need any MPM Screen printer parts,pls contact us anytime:    tony@joysmt.com