00336791S04 SMT PARTS SIEMENS COMPONENTS CAMERA 24x24  

JOY TECHNOLOGY CO.,LIMITED can supply other spare parts as follows：

00344109S05    LIFTING MAGNET cpl. used
00344204-04    SERVO AMPLIFIER TBS200/10X1
00344205S04    SERVO AMPLIFIER PC-BOARD TBS200/15Y1
00344207-02    BALLAST CIRCUIT BS200/1000
00344215-01    CABLE: ICOS-VIDEO CABLE S23
00344216-01    CABLE: ICOS-VIDEO CABLE S23
00344220-01    Cable Flash-Mode Portal-2 S23
00344260-01    Cable: Light Portal-1 S23
00344269-01    SOKO NOZZLE 7xx 2x1,6
00344482-02    LIGHT TABLE WITH POWER SUPPLY
00344485-09    Processorboard 80C515C
00344488S03    SM-Board modular
00344489-02    Vision-Board modular
00344637-01    Comp. feed. changeov. table S20 cover
00344686-02    ECCENTRIC Disc
00344687-02    TRANSPORT PROTECTION
00344689-01    COMPONENTSTABLEACTUATOR
00344692S01    PROTCTIVE JACKET FOR RIBBON CABLE
00344757-01    Track ruler components table lock
00344764-02    NOZZLE REJECT-BOX
00344769S02    MVS200/EDA1(ICOS) V2185 XC75
00344771S04    POWER SUPPLY UNIT
00344772S02    star mounted  SP-6   DLM1
00344862-01    TOOL FOR ADHESIVE MEASURING SCALE S50
00344898-01    ANGLE PLATE FOR CUTTING UNIT
00344900-01    DISTANCE SLEEVE DM5,3x10x50

00119185-02 Retrofitting kit to 230/400V operating voltage for SIPLA
00119405-01 Long Board Option for SIPLACE HS-50: with this Opti
00119605S02 Power Supply Conversion Instructions 110V for SIPLA
00119610S02 The Feeder Protection consists of a cover over the fee
00119619-01 Measurement device for inspection of the coplanarity o
00119621-01 The Twin Head Re-Configuration Kit is necessary to e
00119633S02 The Feeder Protection consists of a cover over the fee
00119654-01 The Re-Configuration Kit Highforce Head is necessary
00119665-01 The 12-Segment Collect and Place Head Re-Configur
00119666-01 The 6-Segment Collect and Place Head Re-Configura
00119674-01 PCB vision module Multicolor for placement station HF
00119680S01 Set of 12 magnetic support pins for large PCBs for the
00119683-01 This item is required one time per SIPLACE HF-Series
00119689-01 With this reader two dimensional PCB-Barcodes, e.g.
00119696-01 With the Option Retrofit Vacuumpump SIPLACE HF a
00119720S01 0201 Package for 12 C+P, X / D-Series
00119747-01 Holder for Nozzle Changer TwinHead for MTC X-Ser.
00119920S01 01005 package for D1/D2/D4
00120040-01 ADJUSTING GAUGE COMPONENT CARRIAGE FOR
00130370S01 PCB-KAMERA TYPE A (SIPLACE80S/80F)
00130380S01 PCB-CAMERA SIPLACE TYPE B
00130445-01 Barcode reader for set-up control of SIPLACE 80S - 1
00130480S01 CABLE D9.1Y-W1 - HS180
00132070S01 VISION 2 CALIBRATING PLATE
00132110-04 Support tray for Waffle-pack magazines for MS-102
00132206-01 Interface bus cable HP 10833C, 4,0 m

03050484-01 Gas Spring

03053286-02 Y-Axis Cover Air Filter for 120mm Fan

03053294S01 Light barrier z-axis top
03053376S01 NOZZLE CLEANER (ULTRASOUND) 110V
03053538-01 Retrofit kit EMC suppressor power supply
03053551-01 3/2 pressure regulator
03053553-01 GUIDE ROLL 32L OTP 080 P06
03053555-01 Pressure regulator, flange type, 0-4bar
03053559-01 IEC PLUG TO 2xIEC 1,8M
03053899-01 MS-WIN XP Embedded System Licence
03053996-01 Drill diameter 1.2
03054107S01 Sleeve SP12 comp. / 270degree partition
03054393-01 METALL BOX FOR 03038691
03054574-01 Grounding Cable for Operator Cover
03054634-01 Vision Board Spread Sp. X (VBSX) kompl.
03054699-03 Software eXP-SP2 RT MC-2.01 MediaPackage
03055046-01 Filter disk extracton device /C+P20
03055047-01 TOOL FOR ADHESIVE Y-MEASURING SCALE D1/D
03055787-01 nozzle station cplt. C+P20 / d=1
03056199S01 Station Computer S20 (D2334)
03056453-01 MEASUREMENT CASE LIFTING TABLE HS50 ET / D
03056499-01 Nozzle type 1005 cplt. ESD / 1x0,15
03056626S01 12-segm. star compl. DLM3
03056628S01 6-segm. star compl. DLM3
03056683-01 spring 1.8x10.2x62.7 (D-234B) (black)
03057320-01 Nozzle type 905 cpl. ESD / 1x0,15
03057620-01 Components Table Lock 1/3
03058643-01 PCI slot card SIMATIC WinAC NV128

If there is no matching models，pls contact us directly!

（Email: evan@joysmt.com)